Cosworth loom help please.
#1
Cosworth loom help please.
Okay so I've fitted my loom to my engine, the live feed and coil wires are on and all other plugs/ earth.
The main live feed,ignition and fuel pump are all on inside, and I have set the crank sensor gap and checked all leads are in the right order.
It cranks over but wont fire I have a spark at the coil and all four leads, just not sure what's wrong .
Also I have checked the feeds with a test light at the dizzy and crank sensor and they don't seem to have a live feed.? however the ignition module does, and so has the tps sensor but it is a very dim feed.?
Any help would be great thanks..
The main live feed,ignition and fuel pump are all on inside, and I have set the crank sensor gap and checked all leads are in the right order.
It cranks over but wont fire I have a spark at the coil and all four leads, just not sure what's wrong .
Also I have checked the feeds with a test light at the dizzy and crank sensor and they don't seem to have a live feed.? however the ignition module does, and so has the tps sensor but it is a very dim feed.?
Any help would be great thanks..
Thread
Thread Starter
Forum
Replies
Last Post
big_Rad
General Car Related Discussion.
8
15-09-2017 09:36 AM
muz
General Car Related Discussion.
3
16-08-2015 12:57 PM