Originally Posted by
Heathen
The light is on all the time now...does that give any more of an idea of what could be wrong?
The brake machine at the testing station read that all my brakes were working well with very little discrepancy between left and right stopping power.
If the light started flashing during a brake test, it could be either a pressure problem or fluid level. The light stays on when you turn the ignition be cause the pump starts, the light will go out when the system is upto pressure. The light can also be triggered by a low fluid level.
First thing to check would be the fluid level. if its fine and the light is still on, try and disconenct the two pin plug on the reservior cap and bridge the two pins with some wire and see of the light goes out. If it does, its a faulty level sensor.
After this, try jon@work, the guys a ABS system guru
