hi all.. im new here, im always reading up on the threads people write but this time i thought id actuall join and write my own problem with my series 2..
anyways to the subject.. my car ust to boost to 1 bar then a second later drop to only 0.5... when i toke the actuator off it was about an inch back from the pin it clips over.. so wat the've done is pull the actuator arm out to fit onto the pin.. is this wrong ?? .. i had a spare actautor from my frst and put that on so it was as short as possible but so i didnt have to pull it atall.. took is for a test drive and still only 0.5 bar.. then i shortened the actuator an inch as it now peaks at 1.5 bar and drops to 1.0 bar.. confused?