View Single Post
Old Mar 20, 2011 | 11:03 PM
  #1  
tezmanian devil's Avatar
tezmanian devil
I've found that life I needed.. It's HERE!!
iTrader: (8)
 
Joined: Dec 2006
Posts: 1,350
Likes: 0
From: eastbourne
Default mk5 zetec turbo esc cos rep breaking.

the time has come, i'v had enough and i need to fund my gas course so i can work for myself finaly

there's lot's of nice bit's on the car so have a good read through, i dont really want to start breaking the car until the engine and shell have sold, but if i get enough name's down for everything else i will just start breaking it.

all price's do NOT include postage as i would rather people come and collect in person from eastbourne, that way you can see the part your buying befour any money change's hand's...
however, i will put a postage price next to the item's i can post.
i am open to sensible offer's on everything, but i wont let thing's go for peanut's so please, no stupid offer's...

there's picture's of most part's in my project thread here:
https://passionford.com/forum/restor...7-02-11-a.html
i'l post some pic's at the bottom of this for sale thread aswel.

anyway here goes...


xr3i 130/rs2000 MTX-75 gear box, fitted is a ford torsen LSD and the gear ratio's have been played with in order to atcheive 180MPH (was fitted to 'christian&beckys' old s2) £750 colection only or arrange your own courier.

rover m16 inlet manifold (this is the bigger rarer one) modified to allow fitment of a cosworth throttle body, cosworth green injector's, adaptor plate to fit to zetec head, fuel rail £350 + £16 p&p

TTV racing flywheel, to suit rst or zetec, hardly used when fitted to christian&becky's s2 £100 + £10 p&p

alloy oil breather/seperater with little breather filter £60 + £5 p&p

sard feul pressure regulater, -6 fitment £125 + £5 p&p

feulab feul filter -6 fitment (black) £100

front mount intercooler measure's 600mm long by 300mm tall, universal style fitment, brand new, fitted but never used. £100 + £17.50 p&p

s/s exhaust downpipe, heat wrapped, this is made to fit my car so may need altering to fit other's? £30 + £8 p&p

ford racing boost and oil pressure gauge's £60 each + £5 p&p for each

rs2000 rear disc beam powder coated blue with yellow anti-roll bar, fully poly bushed, no disc's, hub's etc as already sold £35

rs2000 front subframe powder coated blue with yellow anti-roll-bar, arb is poly bushed aswel. £80 colection only or arrange your own courier

325mm gold HI-SPEC's, brand new, fitted but unused, slight surface rust on disc's from being sat around on the car £850 + £26 p&p

GAZ gold coilover's, fully height and damping adjustable, virtually new, only been used for a couple of hundred mile's £350 + £20 p&p

front e-tech strut brace to suit mk6 strut top's £50 + £5 p&p

rear sparco strut brace, was mk5, but also drilled to suit mk6, powder coated black. £50 + £5 p&p


one off rs2000 buldge/bubble bonnet, the bonnet has been cut and a scoop/vent formed into it, no stick on crap, done properly! £120 collection only!

aero catch lockable bonnet pin's, brand new and still in packaging £35 posted

mk5 rs/xr morrette head lamp's, inner lamp have been removed and air duct's put in there place, will come with all wireing £200 + £12 p&p


escort cosworth HEX cloth interior, front + rear seat and front + rear door card's, good condition, but need a clean, 1 rear card is broken, but back seat cover's it... £350 collection only!


mk5 steering wheel boss £20 + £5 p&p

17x8 compomotive MO's et35 iirc will have to double check, but i think the tyre's size's are as follow's.... 2x 215/45/17's and 2x 205/40/17's, all tyre's are toyo t1r's and all have plenty of tread because i only used them for 3 month's on my old saph, all wheel's are mint! and havnt seen a road since being powder coated black!! come with blue centre's £600 collection only.

DTM wing mirror's to suit mk5/6 escort, brand new, only trial fitted a couple of week's ago £20 + £5 p&p

WRC fibre glass grill, brand new, but been chopped down abit so it would fit above the front bumper properly, still look's the part though, no mesh fitted, £35 + £6.50 p&p



there's plenty more that's i'v proberly forgoten, but once i start to break the car i will update with pic's and price's etc.

i would prefer collection on all the above idealy because i find it hard to get time to go to the post office to post thing's, so you may have to bare with me if your wanting something posted, i will do my best to post thing's as quick as i can though!!


here's a few pic's of the car and a few part's, i can get pic's of individual part's on request if need be....
















there you have it, i really am gutted to be doing this, but i really need to sort my life out and get my career sorted, if i could afford to do my gas course aswel as get this finished i would, but unfortunetly i cant atm so need's must, only a car at the end of the day eh

like i said above, all price's are ONO so sensible! offer's are welcome.

thanx for looking.

Last edited by tezmanian devil; Apr 5, 2011 at 07:46 PM.
Reply