Originally Posted by
s1 2oobhp
been trying to drop the front anti roll bar but on the o/s the big 19mm bolt just turns but wont come off any ideas cheers
sounds like someone has overtightend it and stripped the threads on the captive nut inside the chassie , i have the same problem.
was going to cut the head off get the anti roll bar out of the way, cut the old plate with the captive nut out.
make a new one and weld it back in.
its alot of work but someone has done this in three different places on my saph the TITS.
unless there is another way to save all of this hassle ?
hope this helps mate