Originally Posted by
jon@work
ignition on
do you hear the ABS pump working ?
if you do :
ignition off
unplug ABS ECU connector
remove connector cover
have you got continuity between terminals 9 and 10 ?
ABS pump is the one with reservior attached?? yes that whirrs / primes and stops when upto pressure.
i have removed the reservoir cap and the red light eluminates on the dash with the handbrake disengaged, so the level sensor is fine. I have bridged the two pins (two pin connecter) and the light stays on, confirming level sensor ok. I have tested pins 9 & 10 and do have continuity, so wiring between ecu and level senor is ok too.