Thread: My 24v Cosworth Home Grown Single Turbo Conversion
View Single Post
Old Oct 10, 2010 | 09:19 PM
  #15  
Damocos's Avatar
Damocos
Regular Contributor
 
Joined: Aug 2004
Posts: 337
Likes: 2
From: Kent
Default
Engine nearly ready to go back in, modded one of the oil returns from the head to take oil breather.....

Name: 150820101450.jpg Views: 1132 Size: 63.0 KB

Good old copper pipe fittings.....lol
Name: 150820101445.jpg Views: 1177 Size: 68.1 KB

Engine cleaned ready to go in......
Name: 150820101448.jpg Views: 1220 Size: 80.8 KB
Name: 180820101454.jpg Views: 1148 Size: 63.6 KB
Name: 250820101462.jpg Views: 1102 Size: 63.9 KB
Name: 180820101453.jpg Views: 1088 Size: 55.3 KB
Name: 180820101459.jpg Views: 1304 Size: 83.6 KB
Name: 180820101458.jpg Views: 1100 Size: 73.2 KB
Name: 180820101460.jpg Views: 1207 Size: 87.1 KB
Name: 180820101457.jpg Views: 1156 Size: 110.8 KB

Cosworth oil breather....
Name: 260820101463.jpg Views: 1118 Size: 69.7 KB


Adjustable fuel pressure regulator....
Name: 260820101464.jpg Views: 1200 Size: 81.6 KB
Name: 260820101472.jpg Views: 1136 Size: 81.3 KB
Name: 260820101471.jpg Views: 1170 Size: 87.2 KB
Name: 260820101470.jpg Views: 1262 Size: 86.8 KB

The remade inlet pipe, original was plastic
Name: 290820101473.jpg Views: 1144 Size: 127.8 KB
Name: 290820101474.jpg Views: 1163 Size: 112.0 KB

And this was the original vis unit that i took the gubbings out and blocked the holes as not needed with forced induction.
Name: 290820101478.jpg Views: 1124 Size: 62.6 KB
Name: 290820101479.jpg Views: 1153 Size: 57.1 KB

Manifold all wrapped.....

Name: 300820101480.jpg Views: 1174 Size: 63.7 KB
Name: 300820101483.jpg Views: 1153 Size: 73.5 KB
Name: 300820101485.jpg Views: 1076 Size: 71.7 KB
Name: 300820101484.jpg Views: 1059 Size: 89.7 KB

Wastegate and screamer pipe on......

Name: 300820101487.jpg Views: 1084 Size: 92.4 KB
Reply
0