ok thought it was time to catch up with the progress
to finish off the steering i bought some new track rod ends
also had to clean some the hubs where the powder coating is'nt supposed to be,
with a purple scotch wheel it was'nt too much of a problem
which allowed me to fit the coilovers to the hubs
and on the car
been buying some gauges as its the perfect time to fit the sensors to the engine
the oil temp sensor is either to be fitted to the sump or sump plug
act sensor from R&B motorsport to help me keep an eye on the inlet temps
the new inlet manifold will be drilled and tapped to take the sensor for this