Originally Posted by chaffe

hi there, the mt75 was never made for a v6 bell housing bolt pattern in rwd, only came in 4x4 guise. So unless you split a 4x4 box and a mt75 off of a late 2 litre dohc sierra and mate the two together, i think you will struggle with the box. For an NA v6 im sure the std type9 box in good conditin will cope with all your needs, if it becomes a problem you can always look into another solution, as for the engine and driveshafts etc, everything will work well and bolt together, the only difficult bit in the project will come when you come to put in high pressure fuel pump, lines, wiring, mounting your throttle bodies and wiring the ecu, then it has to mapped! its always the engine management side of things that holds up these projects, bolting stuff together is the easy bit! i would try finding a decent car first thou mate.
all the best of luck though