Epic fail! I did a search on here and that's what it said. Oh well I'll do it again on nite, don't take too long anyway ......
Originally Posted by
10th_racer
as karlos said they are 8 thou and 10 thou, gota do mine again the weekend, all good fun.
how are you lot setting yours? i'v been doing mine rocking them, so rock the 4th and set the 1st, rock the 3rd and set the 2nd, rock the 2nd and set the 3rd, rock the 1st and set the 4th.
I just leave them all out, then rotate the cam so the lobe is pointing up, then rotate 180degrees so it is pointing down, drop in lifter, fit arm meassure gap, adjust whilst in situ (bit fiddley but saves some time), remove, lock off, refit and check, remove, adjust, repeat...