Originally Posted by
jon@work
May be a simple fix. If it's on all the time, remove the 2 pin connector from the brake fluid reservoir and temporarily join the 2 wires (a short bit of wire shoved into the terminals will do nicely). If the light goes out, then either the brake fluid level is a little low, or you need a new reservoir cap.
Hello John, ive made sure there is enought brake fluid in the car. About 4 months ago i did both front bearings and since then the abs light dont turn off, before i did the bearings the light was never on, only when the car was switched on. So im not too sure what ive done since the bearings.