Originally Posted by
mr_joe0606
Mine has just start to smoke when started cold and clears within a few seconds going to change stem seals any advice in doing them.
Cheers joe
if the staem seals where gone it would smoke when you let off the throttle .... they are easy to change mate just get a set of seals and a rocker cover gasket.
tools make sure you have a good pen magnet to get the collets out to remove the valve springs out..
just turn the engine over untill the one you are changing is slack and push down hard with a big ring spaner on the ring end or get a valve spring press and use the magnet to remove the collets take of the spring and fit new stem seals... then just put it back how it was. then there is no need to remove head.....
hope this helps