i was really really surprised at how much it leans in cornering its on iirc 375lb front springs so not light !!

looks like all that weight over the front is deff causing issues, intensions are to lower the rear by quite a bit its about 1-2 inchs higher than it should be.

stiffen the front either with a harder anti roll bar or some harder springs i like how it rides atm so will try a anti roll bar first.

there are alot of other problems with set up of the car atm the front camber and caster is all over the place and does not have close to enough caster.

and the rear beam is toeing out a little, its all little things but i think there all enough combined to make it feel very unstable.

i had alot of boost problems on the day as the new manifold caused my boost map to be all over the place. i did manage a 1.22 thou from the data logger still quite a bit more to come out i would like to think that i can make it 1.20 flat or better at rs combe.