The rivets that had been holding the build up came in the post this afternoon, the ones i had used in the eralier photos were just for location while i drilled the holes, the new ones have a much larger head on them.



Not done a great deal of work on the car today, been round my dads fitting new wheels to his Mini, but managed to get the floor panels finished off.

An application of Wurth Bond + Seal stops water/dirt getting into the chassis and also into the cockpit



Finally all the rivets were fastened up and the edges of the panels clamped into position while the sealant cures, the extreme left/right sides of the panels have been intentionally left without rivets as this is where the outer body panels are riveted to the chassis later in the build.