Originally Posted by timbhp

Its started as some of you know ive got a gokart with a gsxr 1000cc bike engine and a lot of one off parts i had to make that we took to curbourgh which went very well for its first time out,
And some one who shall remain nameless stuffed it into the bank and reshaped the chassis slightly thanks kev, oops wasn't going to say ,
So this is the rebuild of it
pics up soon

Originally Posted by timbhp

just setting up old and new so you can see the changes and i have got specs before i start cutting ,so i can add in longer chassis rails and extra support rails to take the power,

Originally Posted by timbhp

more pics before i start long bar is so i can line up both chassis



cut chassis

spigots turned down so can tap inside tubes for tight fit before welding 7 of these reqd


spigots in place

chassis tubes to extend chassis 18"


turned drilled and taped inserts for rear chassis tubes to take rear bumper


rear inserts in place

this saves alot of work with hack saw


all tacked together after a lot of checking and double checking


pic with rear axle in place to check its all square and true, the tubes next to it are for the next bit of the chassis to stop flex and to give a bit of side impact protection which you will see on the next lot of pics
thats it for now.