View Single Post
Old Feb 24, 2010 | 03:51 PM
  #2  
HarleyP's Avatar
HarleyP
Ford Man
 
Joined: Nov 2009
Posts: 27
Likes: 0
From: Blackpool
Default

Originally Posted by swebber23
Basically i have a mk3 fiesta that is in need of a new engine. I was reading fast ford this month and have seen an rs2000 running at 301bhp with a 2.3 ford galaxy bottom end. My fiesta is an rs1800 so has the 1.8 zetec engine. My plan was intially to drop in a 2 litre zetec then run it on 45mm carbs.

I have a few questions.

Is the 2.3 ford galaxy engine a zetec engine? I ask this as the car is essentially a sister model to the vw sharon except the vw doesnt use a 2.3 in the range.

Will this engine drop into the fiesta without the mounts needing modifying? or will the old galaxy mounts fit?

Will this fit the ib5 box in the fiesta or will i need to change bits over just like when you do a 2 litre conversion i.e. changing sump and oil pick up? Will the 1.8 sump and that still fit?

Would it be easier to just bore out the 2 litre to a 2.1 or is it not worth the extra expense?

Any Tips or Advice is appreciated. Please make constructive comments.


hi mate im not very good at the advise part as i havnt tried anything first hand yet because im still at college lol anyways i have a mk3 and iv been wanting a bigger engine since i got it (its a 1 litre pop) but as iv bee nat college and choose only to work on the fords we have there iv noticed that the scorpio has a 2.3 dohc engine that looks identical to the
mk5 rs2000 engine weather its the same size down below i dont know but thats what i want in mine when i can afford petrol lol

anyways i hope this helps u if your looking to do a 2.3 into a fiesta should be intresting as iv never seen it done before which is really why i wanna do it so it would help me aswell keep me informed

Last edited by HarleyP; Feb 24, 2010 at 03:55 PM.
Reply