Originally Posted by
cozmeister
It might well be. Switch on the ignition (don't start the engine) and disconnect and re-attach the plug on the amal valve a few times - it should click quite loudly if it works. You did the right thing dumping the pikey bleed valve.
The default behaviour is to protect the engine, so you will only get about 5psi, if that.
hi pal, im gonna try wat u said over the wkend. ive just orded a evolution chip for my spec too =)
back to the amal valve, im not sure til i check but when my m8 1st fitted amal valve, he ran a live straight too it, n it clicked loud ish on ignition bein turned. i mentioned to wire it up where it should be ( old amal valve wires) so he did. he checked them 1st too see if they were good and they was. but i dont hear a click no more like i used too when it had direct live??