Originally Posted by
darrenr1969
Hi, I have cracked the plastic heat shrink fuel pipe that feeds the fuel pump(connects to the banjo)inlet side and was wondering what I can use to replace it.
Also is the 4x4 cosworth fuel filter the same as the 2wd one.thanks
You mean the U shaped pipe, that goes from the pump around the back of the carrier to the fuel filter, and has a banjo on either end ?
If you cannot find another just get a braided pipe made up, be cheaper than paying inflated cossie prices anyway, and be flexible son won't break/crack.
Fuel filters same 2wd and 4wd.
The pipe you refer to though is the OUTPUT from the pump to the filter, as the inlet is a braided bit of flexy pipe direct to the tank to pump.
tabetha