my m8 has just fitted a EECIV manifold and tps to his 3dr
its running a l8 red top ecu and a 2wd loom.
ive just plugged my iaw in and his tps isnt working properly.
can you run this tps on a l8 and 2wd loom?
weve drilled out the adjuster screws on the side of the tps and got the idle down to 6% before we had to pack up,
but it only reads to 77% at ful throttle, but with the TB in your hand you can see it is fully open and the springs/mech on the side is at the stops.

can he run this tps or does he need to adapt a pf09 to fit the TB? (which should read 0-80+%)
cheers