Originally Posted by
G 74F 00
Lhd220turbo
aiming for around 380bhp its a t34.48 but i have got a .55 turbine housing spear. i've got the forge thicker core rs 500 intercooler forge ally rad not sure what stage chip was in it before but was boosting to 2 bar. got the forge breather on it to.
thanks for the help.
Tabetha
would you go for mahle or weitec pistons? i love going side ways and shameing people in my local area who love finannce and 20grand + cars its just the look on they're face when you pass them in a serria, lol.
where can i get the fan loom upgrade and fuel loom upgrade from?
thanks.
my old spec was this
t34.55
siemens 55lb
pace 500 cooler
magnex exhaust
msd chip
standard head with standard internals & compression
grp a head gasket
bailey breather
ap 6 paddle clutch
peaked at 30 psi and held 25/26 psi - makes for an awesome road car, i guess mine was around 370hp (never had it on the rollers) i set it up myself so maybe i could have got a bit more with a live map
Mahle pistons are fine, proven and tested, i would only move away from Mahle pistons if you are going for over 550hp, then i would have CP pistons
Mahle are forged as standard.