In preparation for fitting an L8, i thought i'd have a look at the ECU wiring on my super 8.

Had a poke around and barring the extra injector/boost pot looms that will need to be reomved from the connector, i found 3 wires disconnected.

They are

Brown White
Blue Brown
Blue Green

I had a look at a wiring diagram and they seem to be

Pin 2 on the ecu - Brown White - Lambda sensor
Pin 6 on the ecu - Blue Brown - Knock Sensor
Pin 22 on the ecu - Blue Green - Knock sensor

I take it when i fit my L8 (going closed loop/wasted spark) i can just plug all these pins back in where they should be with no issues?

My car is '91 and never had a lambda fitted, so i assume this along with the knock sensor wiring was removed for ease of fitment of the second 4 injector wiring?

Would just like someone to confirm what i'm doing is correct