Originally Posted by
RWD_cossie_wil
It should all fit straight in, scorpio housings are identical. How far out is it? Are you sure your car has the 2wd 7.5" beam and not an xr 4x4 or 4x4 cossie 7" beam in it? Measure across the rear mounting points to find out, as a LOT of cars have the wrong beams in due to people putting them over kerbs sideways etc.
well the diff I took out and send to them was a 7½"....and I have a 7" diff ánd this wont fit the beam unless I fit some spacers on the top holes...so I'm quite sure it is a 2wd beam...anyway there is about 19.4 cm between the top holes in the beam
