Update

Car is now home after 2 months! and more at the level I wanted it to be at. Thanks to James @ Nortech for making the manifold for me I just wish it had not taken so long as its been hold up after hold up on this entire build but the spec has gone silly too, so its partly my own fault.Not sure if James took me to seriously about the up-pipe and left me to cut the holes in the panels LOL

It is now fitted with Garrett GT4088 twin scroll turbo and 2 Tial 44mm external wastegates, manifold also has take offs for EGT monitoring on every cylinder and has 2 different styles of downpipe so to speak!

Very pleased with my manifold even though it took a long time to come together. All constructive comments welcomed as always but do not ask silly questions as to why I have done this/that its because I want to but if you see a problem im all ears. This turbo is of course going to break things along the way but no one over here (UK) can be arsed to push the boundries and spend more than a fiver lmao There are things I have overlooked to because I am not made of money but im sure the weak link will be found soon enough!

This car will still remain road legal as much as possible and does have a normal style downpipe and silencer for road use, some new traction bars are going to be made to eliminate torque steer as much as possible as most of it comes from bush flex in Novas/Corsa etc and I have broken a standard tie bar with 400 ish bhp before.

I now have some fibreglass front widened wings to use with the wider rim and tyre setup which gives the car a more street look if nothing else.

Next thing to sort out is radiator placement and get one made up, source the materials to make 2 sets of screamer pipes, one out of bonnet for some fun runs at the pod and some back into the system for road use as I cannot see mapping whilst listening being all that great with them open under the car!

Injector driver should be here any day now and once that is here the loom will be finished. All of the fuel system needs to be redone now as it was spec'd for a GT30 and fairly small fuel rail, new fuel rail which can accept up to -10 JIC fittings is being fitted to my inlet this week and I will need bigger return lines, regulator, swirl pot and another pump ideally so I can run end feeds and centre return at the rail.
Inlet should be back with me by the end of the week and I hope this is not another 2 month wait.

Its gone abit mad I know but I do not have much outgoings a month and I work hard 6 days a week so it will get there soon enough.

As most of you know my main aim for the car is a 10 second pass be it on treads or not it will happen, I will not give up, still a long way to go but over Christmas should see a fair bit getting done.

Hope you all like it.
YO to the haters !

BEFORE



AFTER