Originally Posted by
tobyjug_1988
sounds all good, anyidea on how much this would all cost?
+0.5mm Overbore with torque plate & Ultra-fine finish
Forged Pistons (Cossie) £450ish
Farndon Steel Rods £700
If the crank is ok, just have it checked/micropolished
New Oil Pump (£50+)
ACL HD B/E`s & Mains (£100)
Balance the lot
All your maching inc balancing should be around the £250 mark. You can get cheaper steel rods for around the £350 mark also
