Originally Posted by
bud-weis
Karl Norris
Stu
Mark Shead ( as long as his runt is nowhere to be seen )
Tony Turbosystems
Well those people often disagree on things, so when that happens which one would you agree with?
For example, ask Karl and Mark what compression you should run for 600bhp, and you will get two VERY different answers.
As for what i disagree with, the first part about comp ratio...there's really no need to worry about it at those power levels.
you disagree with his comment that if you use a chip that is designed for low comp you must also use the correct comp to match that?
Your other comments are kinda right, although it depends what parts are fitted to get a standard head to make 400bhp...i've personally never seen a T34 do it anyway.
j1mbo has, as his dad has built that very engine before, especially if talking about a cut back blade t34 (you dont mention if its a standard one or not you refer to and neither does he)
Don't take my ramblings as fact though whatever you do!
Good advice!