Originally Posted by
C4llyT
So does this take a lot of time?
I thought you'd turn up and get chips swapped, and that was it.
So you'd have to hang around a bit then?
I appreciate this was a no reply thread....
Long gone are the days you took a chip from stock, burnt an epro and plugged it in sadly. Nowadays its FAR more complex as you need to start with the original file and modify that.
How long that will take varies from system to system so its hard to say. I can recalibrate a 2008 Bosch EDC17 BMW control unit in around 25 - 35mins if uninterrupted for example. read and reprogramming time is about 30 Min's each way, so lets say its about 2 - 3 hrs of a job to do it properly.