Originally Posted by
crashley
nice job mate i am curently in the middle of building one myself not got as far as u trying to get hold of engine so i can start cutting what did u have to do to make the 4 pot callipers fit
Basically mate you have to drill the locating holes in the hub out to 12mm, then grind about 3mm off the inside mounting face of the 4 pots so they sit central on the disc, then just fit new pads and pins and bolt the callipers on using a 12mm bolt + nylock nut. The braided banjo type brake hoses which you have to use due to room are available from mike rainbird off here for around £55.