Thread: Closed loop Co prob
View Single Post
Old Jul 26, 2008 | 03:00 PM
  #15  
Matt Baxter's Avatar
Matt Baxter
Back in black!
iTrader: (37)
 
Joined: Feb 2006
Posts: 6,084
Likes: 6
From: Fleet, Hampshire
Default
Originally Posted by JTECHSAFF
check your secs wiring then for the map signal....you may find its over reading...

the white wire on your secs loom, goes to pin 15 on the ecu plug
its got a new loom off Ryan but was the same this with the old loom
Reply
0