View Single Post
Old Jul 12, 2008 | 01:22 AM
  #1  
JonnyBravo's Avatar
JonnyBravo
10K+ Poster!!
 
Joined: Jun 2004
Posts: 11,058
Likes: 7
From: Huntingdon
Default Turbo Nova thread

A good friend of mine has recently started to build his nova turbo back up, the old spec was a stockish engine with a hybrid turbo which was approx 300hp, he used 100 shot of gas on the strip and ran a 11.9@124mph on 888's, that was a few years ago now and the car has taken a backseat whilst he enjoys his GTR but the GTR is now parked up and progress has been quite good on the nova so far.

I'll just post up a spec list and let the pics do the rest of the talking.

C20XE engine block with under piston cooling fitted
86.5mm Wiseco pistons
Saenz steel rods
Cometic 1.9mm gasket
Pace dry sump kit
ARP head studs
ARP flywheel bolts
Ported Coscast cylinder head with +1mm valves,
QED double valve springs
Steel retainers
QED solid lifters
Custom ground Piper camshafts
SBD vernier pulleys
Custom inlet manifold with 75mm TB and Wizards of Nos nitrous setup
Nortech exhaust manifold
GT3071
750cc RC injectors
Emerald ecu, Car Looms Uk loom
MSD Zetec coil
Tial blow off valve
F28 with Quaife LSD
Helix 6 paddle clutch
Equal length shafts
Power Steering

This is how the car was last time round :







Trial fitting a few things NO ROOM



With the engine out the bay needing painting to match the rest of the car:





Now that was done with it was time to start building the engine :











Once that was built and in we waited for the inlet to come back from being welded together :





And it fitted.....just





Then we had to tap the nitrous side of things in :





And finally onto tonight where we finally got the suspension back on and tried out the wide steelies for the slicks









More updates next week

Last edited by JonnyBravo; Jul 12, 2008 at 01:24 AM.
Reply