Originally Posted by
Cowboi
got my engine in the car nova but hit a few problems few problems.
the turbo intake pipe wont fit past the crossmember.
do you just cut it a bit, looks a bit far to bend.
also i cant remember what colour wires from the nova loom are the oil temperature, and what ones goes to the alternator.
and where do i connect the wires going to the bottom of the sump to. they go to the round plug on the let loom, but not sure where they go on the nova loom.
any ideas?
cheers
yes you have to cut the front cross member i will sent you a pic later on of how much, there is NO wire in a nove loom for the Oil Temp, there is only oil pressure, the wires on the bottom of the sump is for oil level and is not needed simple cut this wire off.
If i remember rite its the Blue/White wire for the alternator