Checked all readings at ecu plug before to the spec in the ford tech manuel, all seem ok.
Ive changed ect ,atc, phase,map sensors, checked tps and isv.
BUT now i have BIGGER PROBLEMS tried fitting new grp A fuel pump and the output side is too small so orig nut wont go, SO i decided to refit old pump start it up and check volts 2 pump.
Car turned over for a while as normal after fitting new filter, then fired up but i had a leak from filter, so i turned it off, tighten joint and F##K ME now it wont start.
Any ideas guys? maybe need to think outside the norm as im captain unlucky with cars and should be in mental home with all this S##t.
MAny thanks guys. cheers steve