Hello Folks
I'm gonna ask this question and i'm sure that all the answers will be on here somewhere, but here goes.
I'm thinking about doing a zvh conversion on my Series two, what sort of things do i need. I've got a 1.8 zetec block and i know that the oil breather on the front needs moving and the block needs tapping for an oil return for the turbo and some oil galleries need blocking up.
But do i need some low compression pistions cos i've seen people do them with a decomp plate and two head gaskets, but that doesnt seem like a long term solution to me.
Does the CVH Head need some extra alloy welding to in so that it gets a good seal on the head gaskets?
What about engine management i've been looking at Fiesta RST OFAB management? i know this mean needing the efi inlet, but will i need the flywheel aswell cos thats got a position sensor on it.
Any advice, would be greatly accepted.
cheers
chris
