black map sensor! doh!

yes mate its gunna be the full kit for you then im afraid.
check ebay also as there is always green injectors and map sensors on there.

if your going to run stage 3 (330bhp ish) they recomend you get a 360 bearing in your turbo as well just to take the extra load.
althogh saying that i know plenty of people who run this stage on a standard turbo although the t3 will start to run out of puff at max rpm

if it were me id just do the chip, injectors, and map sensor and then at a later date just ditch the t3 turbo and change it for a t34
depends on how much power you want if you do this as the t34 with the .48 housing is good for 360ish bhp and has little lag or if you go for the t34 with .63 housing they are good for 400bhp but take a while longer to spool up.

ive just put the .63 on mine