right i got it running and it does sound sweet and idles lovely when its warm,but startings a total slut from cold until i put a live feed into the afore mentioned relay connector and it fired up but leave the live feed in there for long it runs lumpy and cuts out eventualuly

also the fuel pump relay on a s1 loom is has a blk/yellow wire to the relay seperatly to pin 50 iirc should this be connected to anything as im runnung a s2 fuel pump relay that ive wired off the diagrams

just to refresh ya safechav




Ahhhhhhhhhhhhhhhh, ahhhhhhhhhh! True!

Think thats the injection module relay plug from what i remember! (ive not seen many proper s1 looms)

That IS important, without it the KE ECU will have no power supply and makes them a complete slut to start from cold.




i still cant get one of these relays from anywhere local its doin my head in but atleast allswell mechanicly apart from no boost lol is there anyway of wireing it up any other way or do u know anybody with one


also ive wired up the s2 relay as in the haynes and it primesswitchin the ign on, but on cranking it isnt clicking ie gettin no feed from coil/ecu or whatever so i bridged it but by bridging it has it mad some thing else not work ie thermo time/cold start

i know u have your own probs at the mo. but if u get a min would u have a look please no worries if ur busy cheers matey