Hi,

Was wondering if anyone can help - have recently taken on building an XR2 Turbo from an old Escort RS Turbo i had - Engine and everythings now sorted however i am having problems with the electrics - i have followed a guide supplied on "Retro Fiesta" website explaining how it all wires up yet i'm having the following problem:

When i wire the fuel pump relay up the fuel pump starts without the ingnition?? not only this but it continues until the pressure finally bursts the connections on my fuel intake pipes! My wiring of the pump is as follows:

Black wire from Relay - Balck wire on coil
Thin red/balck wire on relay - Secondary airflow thinggy
Thick red/balck wire on relay - +ve terminal on Pump
Thick red wire on relay - 25amp perminant live
Green/red wire goes into ECU - never been touched
Brown on relay- earth
-ve side of pump earthed to chassis

Even with the pump running none stop i cant get the engine to turn over either?? I know the fuel is getting as far as the metering head as when i slackened the cold start injector feed off fuel came out.

Anyone got any ideas?? I'm totally out of my depth now!! LOL
Any help is much appreciated!