Originally Posted by NUTS RuS
Originally Posted by Franco
Anybody got a front & rear picture of a 355 floating disk fitted to the bell (with bolts & bobbins assembled).
Cheers
Not 355 but here is a fitting guide for floaters
Lay disc face up
Install the float bushes (or bobbins as you call em )
Turn over and fit the screws (and if supplied domed washers - dome up)
Add loctite now (
not prior to screwing in)
Torque to 11 - 14Nm
HTH
Nice photo's but no help whatsoever to Mr Franco as the pics show the Brembo system!