Like this - just the little black toslink "box" that I can fit to a PCB?



Basically, I have one of these;

http://www.maplin.co.uk/Module.aspx?...=97124&doy=5m3

But mines the later one without the optical audio output

Now, I took it apart and looked at the PCB inside - it still has the space and the holes in it for an optical toslink header.....

So, I was wondering if I got hold of the header itself, could I fit it to the PCB to see if the firmware still supported it?

Pic of PCB;



Optical header spot is far left, next to the VGA output...