Today I've fitted;
MSD Chip
3 bar map sensor
803's
-31 Actuator
Crank Position Sensor
Temperature sensor

Before I changed all this the car used to cut out at 6psi this has now gone and the car really shifts but it still only makes 6 psi (using the half hole method) I've shortend the rod as far as it will go but it will still only make 9psi. I was expecting around 20-24, I've still got a T3 and standard cooler so I was going to turn the boost down to about 12 until I can new items, but I can't even get it that high. Any one had this before or got any ideas.