Hi guys

See bottom of the thread for the solution ......



I have reposted, as the other thread went a little off topic! (my fault)

I tried the voltage test that was suggested, and it the multimeter read 4.94 volts between pins 11 and 17. Unfortuntately it doesnt vary much with more or less throttle.

What we know -

1. I have just changed from a L6 to a L8 ECU.
2. I changed the TPS to a PF09 and swapped the outer wires on the sensor, as instructed.


So is the sensor knackered? Or am I testing the wrong pins?

Would I know on the running of the engine if the TPS was knackered?

HELP?

Thanks guys

JJ