Originally Posted by biglee
i have a few questions....
aircraft fuel burns at 1300 deg, steel melts at 2009 deg...HOW??
Jet fuel burns at 800° to 1500°F, not hot enough to melt steel (2750°F). However, experts agree that for the towers to collapse, their steel frames didn't need to melt, they just had to lose some of their structural strength--and that required exposure to much less heat. "I have never seen melted steel in a building fire," says retired New York deputy fire chief Vincent Dunn, author of The Collapse Of Burning Buildings: A Guide To Fireground Safety. "But I've seen a lot of twisted, warped, bent and sagging steel. What happens is that the steel tries to expand at both ends, but when it can no longer expand, it sags and the surrounding concrete cracks."
"Steel loses about 50 percent of its strength at 1100°F," notes senior engineer Farid Alfawak-hiri of the American Institute of Steel Construction. "And at 1800° it is probably at less than 10 percent." NIST also believes that a great deal of the spray-on fireproofing insulation was likely knocked off the steel beams that were in the path of the crashing jets, leaving the metal more vulnerable to the heat.
But jet fuel wasn't the only thing burning, notes Forman Williams, a professor of engineering at the University of California, San Diego, and one of seven structural engineers and fire experts that PM consulted. He says that while the jet fuel was the catalyst for the WTC fires, the resulting inferno was intensified by the combustible material inside the buildings, including rugs, curtains, furniture and paper. NIST reports that pockets of fire hit 1832°F.
"The jet fuel was the ignition source," Williams tells PM. "It burned for maybe 10 minutes, and [the towers] were still standing in 10 minutes. It was the rest of the stuff burning afterward that was responsible for the heat transfer that eventually brought them down."
Originally Posted by biglee
the lower structure of the towers are allready supporting all the weight since they were built?? so how can u say the strcture colapsed under weight??
Once each tower began to collapse, the weight of all the floors above the collapsed zone bore down with pulverizing force on the highest intact floor. Unable to absorb the massive energy, that floor would fail, transmitting the forces to the floor below, allowing the collapse to progress downward through the building in a chain reaction. Engineers call the process "pancaking," and it does not require an explosion to begin, according to David Biggs, a structural engineer at Ryan-Biggs Associates and a member of the American Society of Civil Engineers (ASCE) team that worked on the FEMA report.
Like all office buildings, the WTC towers contained a huge volume of air. As they pancaked, all that air--along with the concrete and other debris pulverized by the force of the collapse--was ejected with enormous energy. "When you have a significant portion of a floor collapsing, it's going to shoot air and concrete dust out the window," NIST lead investigator Shyam Sunder tells PM. Those clouds of dust may create the impression of a controlled demolition, Sunder adds, "but it is the floor pancaking that leads to that perception."
Demolition expert Romero regrets that his comments to the Albuquerque Journal became fodder for conspiracy theorists. "I was misquoted in saying that I thought it was explosives that brought down the building," he tells PM. "I only said that that's what it looked like."
Romero, who agrees with the scientific conclusion that fire triggered the collapses, demanded a retraction from the Journal. It was printed Sept. 22, 2001. "I felt like my scientific reputation was on the line." But emperors-clothes.com saw something else: "The paymaster of Romero's research institute is the Pentagon. Directly or indirectly, pressure was brought to bear, forcing Romero to retract his original statement." Romero responds: "Conspiracy theorists came out saying that the government got to me. That is the farthest thing from the truth. This has been an albatross around my neck for three years."
Originally Posted by biglee
and each tower came down completely in under 10 seconds....thats the speed of free-fall....HOW???
I dont believe that if you time the collapse accurately and then time something free falling it would be the same, didnt look it to me, but i havent actually done those timings personally so cant comment further.
Wouldnt expect there to be a big difference from one to the other anyway though when something like that gets going i can see it all happening very quickly.
[/quote]