Originally Posted by mercury grey minter
Originally Posted by Rab
It's well easy. Can be done for peanuts. Buy a Mk4 EFi XR3i and get all the stuff you need from that.
Then get hold of an OFAC/OFAB ecu and map sensor from a fez turbo, an inlet manifold adapter plate and a sierra 1.8CVH CPS sensor and your singing and dancing. Then break the rest of the 3i and recover your costs.
O.K you say it is easy,so hope you can explain a few points.
1.How much loom do i swap,is it just the ENGINE LOOM and do i need to take the DASH out?
2.I here you have to MACHINE the crank pulley from a 1.8 sierra. to make it fit.
3.Did you encounter any problems in doing the conversion,modding the wiring plug E.C.T.
I don,t want to start a conversion until i know what,s involved and what to look out for.
CHEERS.
dont need to take dash out, just wire up fuel pump and injectors seperate, speak to rab for his special wiring diagram