was looking through some pic's on my pc and cam across the ones from when i done my bumper up.

i got the bumper in 1999 and its been through some changes sice i got it, i cut the top grill part off (they didnt make them like that then) it it had a few repairs since that, someone reversed into it in a car park and scracked the top :x then someone hit it and put a hole in the drivers side part about a inch from the light pocket, both times i fixed it my self, that was back in 02, so 4 years later it hadnt done bad, crack in the spliter part and loads of spider cracks from that crack and around the light pockets due to gel coat cracking, i grond out the gell goat along the crack and drilled a hole at each end of the crack to stop it going further, from there i went on to prep it ready for filling and filled, primed and sprayed.

well my dad sprayed the red.

these are just a few of the pictures, i know its got nothing to do with the rebuild now, but i see it as a early start to it

the white is the gell coat the green/grey/pinky bit is the fiber glass under it its the only way to get shot of a spider crack really, as you can see, i didnt hold back!











just thought i would post them up