right can someone give me some advise iv been doing some brakes on a mates s2 iv ripped all the abs (scs) shit off and re piped it front to rear and fitted cozzy rear brakes and some willwood 4 pot fronts iv done this by feeding the front brakes from the rear outlet on the master cylinder to tee peace then to each wheel and and rear from the front outlet on the master cylinder to rear threw a byass valve to a tee peace to to each wheel but cant get a good peddle there is no air in the system what so ever iv even tried another master cylinder and its still the same iv checked that the rear calipers are adjusted up ok and still a shit peddle any ideas what it could be before i go and burn the thing cheers! ant