.....may just be coming to an end.
















Ball-Bearing core, Cut-back blades, Titanium shaft, 10.5 exhaust housing and a 4" ported inlet. Fitted with a 1.4 bar actuator.

It could potentially run 2.2 bar of boost, which will make around 420bhp, when coupled with the Cams/Verniers that have just been fitted too.

It makes 0.5 bar of boost by 2300rpm, 1 bar by 2800rpm and 1.8 bar by just over 3000rpm. It is foooooooooking rapid.

Oh well, at least I can do more than 60 miles on half-a-tank!!