Ags wheels
#1
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Feb 2005
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
Ags wheels
I just found ags wheels site and noticed they are doing bbs e50 reps in alloy and magnesium in either studded or centrelock fitment, has anyone seen any in the flesh or bought any as they do look good. I have sent an email enquiring about 4 stud fitment ones for a 3 door will wait see what prices come back.
#5
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Feb 2005
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
Are image doing a good copy of the e50 now as nothing on their site, they are only up the road from me so will be interested in seeing pics of yours, also offsets required to avoid trimming the kit. I did notice they can do custom billet wheels is that what you are having made
#6
15K+ Super Poster!!
iTrader: (6)
Hi Daz
I thought i would give you a little more info on these wheels .
After trying for near 4 years to buy a set of 18" gen centra lock alloys with no luck i contacted Arden at AGS wheels and asked him to make me a set of these wheels
Well after 18 months of work , fitting / re,fitting , a bit of her and there etc etc Arden finaly got them 100% spot on , the pic above shows all the hard work was worth it
Arden did these as a one off for me but demand became high within the rs500 touring car world, and Arden now makes these in any fitment ( width etc etc )
There are fantastic quality and look superb , Not cheap , but worth every penny
Here is a link to Arden , give him a ring as he is always willing to chat about your requirements
www.agswheels.co.uk.
Plus , if you want an adaptor kit then contact MK Motorsport ( a trader on here )
His kits are superb and fit these wheels perfectly
I hope this helps Daz
Ps, A bit of irony , I actually found a set of gen Eggenburger 18" centra lock wheels a week after paying for my AGS wheels , lol ,, I still bought them as spares
Paul
I thought i would give you a little more info on these wheels .
After trying for near 4 years to buy a set of 18" gen centra lock alloys with no luck i contacted Arden at AGS wheels and asked him to make me a set of these wheels
Well after 18 months of work , fitting / re,fitting , a bit of her and there etc etc Arden finaly got them 100% spot on , the pic above shows all the hard work was worth it
Arden did these as a one off for me but demand became high within the rs500 touring car world, and Arden now makes these in any fitment ( width etc etc )
There are fantastic quality and look superb , Not cheap , but worth every penny
Here is a link to Arden , give him a ring as he is always willing to chat about your requirements
www.agswheels.co.uk.
Plus , if you want an adaptor kit then contact MK Motorsport ( a trader on here )
His kits are superb and fit these wheels perfectly
I hope this helps Daz
Ps, A bit of irony , I actually found a set of gen Eggenburger 18" centra lock wheels a week after paying for my AGS wheels , lol ,, I still bought them as spares
Paul
Last edited by Mr RS500; 18-03-2013 at 09:32 AM.
#7
300+
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
One thing I will say is the adapters from Paul or MK Motorsport are far better than the ones from image ... I had a materials engineers look at both pics of mine and the image ones and straight away he said fit the ones I've got more meat in the right places etc.
I think there look lovely wheels on 3drs and 500's... Proper
Lovely on Paul's .. Just want mine to look like this
I think there look lovely wheels on 3drs and 500's... Proper
Lovely on Paul's .. Just want mine to look like this
Trending Topics
#8
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Feb 2005
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
cant wait to see yours when you get them, might help me decide on mine, was thinking of 4 stud but looking at the centrelock makes me think again. my car is moonstone but the gold suits them as well.
Thread
Thread Starter
Forum
Replies
Last Post
Adam Graham
Restorations, Rebuilds & Projects.
7
06-09-2015 06:04 AM