Fiesta Lambda Sensor
14-11-2015, 09:02 PM
#1
Regular Contributor
Thread Starter
Fiesta Lambda Sensor
I foolishly cut off my Lambda sensor when I stripped my car, and need to re-instate it, where does the wiring run from, as I'm not sure where to start looking.
Car is a 2000 Mk5 Fiesta.
Alternatively would it be advisable to take the opportunity to install a wideband lambda sensor? The basic spec is cammed 1600 Zetec SE on ITB's and the caving to around 8k with an Omex 600 ecu.
Could I run a wideband with the ecu, or would I still need the standard sensor?
Car is a 2000 Mk5 Fiesta.
Alternatively would it be advisable to take the opportunity to install a wideband lambda sensor? The basic spec is cammed 1600 Zetec SE on ITB's and the caving to around 8k with an Omex 600 ecu.
Could I run a wideband with the ecu, or would I still need the standard sensor?
15-11-2015, 06:28 AM
#2
I've found that life I needed.. It's HERE!!
A quick search wih Google gave me the following:
http://www.locostbuilders.co.uk/phot...iring_EDIS.jpg
http://omextechnology.co.uk/600%20EC...ual%202v01.pdf
http://www.locostbuilders.co.uk/phot...iring_EDIS.jpg
http://omextechnology.co.uk/600%20EC...ual%202v01.pdf
Thread
Thread Starter
Forum
Replies
Last Post