adt1986

Hi all , I'm coming to the end of my project been along time coming but the mot finally book for Monday, my question is the brake fluid reservoir cap has 3 wires go to it to turn the brake warning light off on start up, when I got the car the 3 wires where off the reservoir cap and separated by 3 separate wire clips, I can't find any information in which to find out which wires go where to turn the lamp off , hope to get some help as this is the only thing stopping it going through the mot !!
Thanks you in advance guys

mk2grp1

from cap brown to earth brown yellow to dash clocks brake indicator brown green to handbrake switch good luck on monday

adt1986

But in what order do they plug in to the cap , as in looking down on the cap ie Brown on left and yellow brown in middle ?, as a example

mk2grp1

from above with cap fitted brown green left brown yellow centre earth on right

mk2grp1

that's with the caps spades pointing towards the screen

adt1986

Thanks for the help hopefully the light will go out now then pictures to follow of it all done