Help needed with ABS piping
24-04-2013, 04:52 PM
#1
Virgin
Thread Starter
Join Date: Apr 2013
Location: Dudley
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Help needed with ABS piping
Hi all,
I wonder if someone could help me? I have built a road legal buggy out of a ford puma. I have used the ABS system from the puma onto the buggy. it is working without fault ie the light is extinguishing, there is no fault code stored in the module. I think it is down to the piping from the module to the wheels,that has being piped the wrong way around ie to the wrong wheel as the front wheels still lock under heavy breaking , Does anyone know which pipe from the module goes to which wheel?
Many thanks
Andy
I wonder if someone could help me? I have built a road legal buggy out of a ford puma. I have used the ABS system from the puma onto the buggy. it is working without fault ie the light is extinguishing, there is no fault code stored in the module. I think it is down to the piping from the module to the wheels,that has being piped the wrong way around ie to the wrong wheel as the front wheels still lock under heavy breaking , Does anyone know which pipe from the module goes to which wheel?
Many thanks
Andy
Thread
Thread Starter
Forum
Replies
Last Post
Jack and the Beanstalk
Ford Sierra/Sapphire/RS500 Cosworth
2
09-08-2015 07:03 PM