BradleyHarrison

Hey Guys,

i have a mk4 ford fiesta 1995 and im wanting to do a complete mechanical change....

i was wondering whether you guys could help me out in deciding which options would be the most beneficial route to take, in terms of expenditures and the power/speed output...

i want to change the engine completely but am troubled by what to put in it..... a 1.7 puma...?? 2.0L zetec...?? a 1600 crossover idea was thrown my way aswell...?? which would be the best task to undertake but with minimal structural changes....??

any ideas would be appreciated, thanks

gingerturbo

iTrader: (2)

For cost,time,ease your best option is a 1.7

BradleyHarrison

so with a 1.7 how many things will i have to change in terms of ECU, Gearbox, Wiring Loom, Fuel lines etc. etc.

Glenn_

iTrader: (1)

Look on the fast ford magazine web site.Im sure there is a guide on ther on how to do it


It would be ideal to buy a complete car then swap all the bits over.

BradleyHarrison

i guess that will make life alot easier and probably cheaper option..

gingerturbo

iTrader: (2)

To make things even easier try and get a puma to suit yours I.e digi dash/analog dash

Straight_4_N/a

Block with inlet manifold fuel rail injectors and the altnantor.
Engine bay loom ecu and maf sesnor.
fuel lines if yours are the rubber type.
drivers side engine mount bracket.

you can use everything else off you std engine.

total cost for doing it your self less than 300.

BradleyHarrison

okay brilliant (: