RS2000 F2 Tarmac Rally Car. 2014 photos added
#88
Lucifer II - 666
tank looks mint! love the fuel line fittings.
#91
PassionFord Regular
Thread Starter
Cheers
I designed the tank to have an internal swirl tank, baffled and foam filled . I suffered from misfire on low fuel when I rallied my cosworth and it pissed me off...
I designed the tank to have an internal swirl tank, baffled and foam filled . I suffered from misfire on low fuel when I rallied my cosworth and it pissed me off...
#92
Lucifer II - 666
#93
PassionFord Regular
Thread Starter
was off last week so spent 8days doing 11hrs a day to crack on with it,
had a list of jobs and I must say I actually got them all completed
Loom made (loads of wiring mods and stripping)
ecu fitted
pump wired up
atl sender wired up with gauge
pedal box fabricated and fitted
battery box fitted with varley red top battery
battery relocation leads
FIA kill switch
loads and loads of odd jobs finshed.
Future rally driver lol
and best off all the starter turns over. Not fitted to the gearboc yet as I need to bolt up the flywheel properly
Next up is to fit exhaust manifold (just bought a brand new works spec manifold from tony law), plum in brakes/hydro handbrake, fab exhaust.
Hopefully to get it mapped feb/march. and trackday in june, first event in july
had a list of jobs and I must say I actually got them all completed
Loom made (loads of wiring mods and stripping)
ecu fitted
pump wired up
atl sender wired up with gauge
pedal box fabricated and fitted
battery box fitted with varley red top battery
battery relocation leads
FIA kill switch
loads and loads of odd jobs finshed.
Future rally driver lol
and best off all the starter turns over. Not fitted to the gearboc yet as I need to bolt up the flywheel properly
Next up is to fit exhaust manifold (just bought a brand new works spec manifold from tony law), plum in brakes/hydro handbrake, fab exhaust.
Hopefully to get it mapped feb/march. and trackday in june, first event in july
Last edited by matman; 16-01-2012 at 09:29 PM.
#94
Lucifer II - 666
You borrowing a maxi map from anyone to start it or going for fresh map?
You got those maxis to strip yet?
You got those maxis to strip yet?
#95
PassionFord Regular
Thread Starter
Should be fine to get it running and idle.
Its getting mapped by the same guy who does mapping for mountune and originally did some of the escort F2 cars.
#96
10K+ Poster!!
Its looking very good.
#102
Too many posts.. I need a life!!
Lovely mate, great job... I have a normal Mk6 RS2k and to be honest even in standard trim it's entertaining, with this kind of setup, weight and power it must be fantastic fun to drive. It's a real screamer of an engine that too, I drive a hell of a lot of cars and none is quite like it... hard to put my finger on.
#103
PassionFord Regular
Thread Starter
Lovely mate, great job... I have a normal Mk6 RS2k and to be honest even in standard trim it's entertaining, with this kind of setup, weight and power it must be fantastic fun to drive. It's a real screamer of an engine that too, I drive a hell of a lot of cars and none is quite like it... hard to put my finger on.
Sadly I have never driven the car, but I flipping cant wait...........
#104
PassionFord Regular
Thread Starter
Brand new Tony Law works spec escort Maxi manifold, its a piece of art!!!!
Modified cosworth rad to suit my works header tank and position of my alternator
Massive thanks to Chris at PRP for more powder coated bits
Modified cosworth rad to suit my works header tank and position of my alternator
Massive thanks to Chris at PRP for more powder coated bits
#109
PassionFord Regular
Join Date: Oct 2006
Location: About that area....
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
Ref the exhaust manifold , when Harvey dynoed mine a while back now he said the manifold primarys were too big , if they were smaller id have picked up 5+ hp , mine was Tony Law as well , does look great thou ;D
#111
PassionFord Regular
Thread Starter
The manifold was designed for the roller boddies along with the Maxi spec cams and the matching cylinder head.
Mine is a kit car version, hence the sliders, the manifold just looks ace though lol.
#114
PassionFord Regular
Thread Starter
Brace fitted
Filler cover
Got me some new stickers
And started the exhaust.
Side exit done, hopefully have the mid section done this week.
Filler cover
Got me some new stickers
And started the exhaust.
Side exit done, hopefully have the mid section done this week.
Last edited by matman; 12-02-2012 at 05:00 PM.
#119
Lucifer II - 666
What silencer you gone for?